How to Fix a Washing Machine That Won’t Drain?
Dealing with a washing machine full of water can be frustrating. Before calling for a repair, try these troubleshooting steps to get your washer draining properly again.
1. Check the Drain Hose
A clogged or kinked drain hose is a common cause of drainage issues. Disconnect the hose from the back of the washer and inspect it for blockages. Flush it out with warm water to remove any lint, soap residue, or debris.
2. Inspect the Drain Pump
The drain pump can get clogged with lint, small clothing items, or even a sock. Locate the pump (usually near the bottom of the washer), remove any obstructions, and check if the pump impeller spins freely. If the pump is damaged, it may need replacement.
3. Clean the Drain Filter
Some washing machines have a drain filter or coin trap that catches debris. If this is clogged, water won’t drain. Open the filter access panel (typically at the front bottom of the washer), remove any buildup, and rinse it clean.
4. Test the Lid Switch or Door Lock
For top-load washers, the lid switch must engage for the washer to drain. If it’s broken, the machine won’t advance to the drain cycle. In front-load washers, a faulty door lock can prevent draining. If the washer doesn’t detect a locked door, it won’t spin or drain.
5. Check the Washer’s Control Board
A malfunctioning control board or timer can prevent the washer from entering the drain cycle. Try resetting the machine by unplugging it for a few minutes before restarting it. If the issue persists, a professional diagnosis may be needed.
Conclusion
If your washer still won’t drain, Texcen Appliance Repair is ready to help! Our skilled technicians can quickly diagnose and repair any washing machine issue. Call us today for fast and reliable service!
For more information visit us on Google Maps: https://www.google.com/search?kgmid=/g/11h3qn_czx
Visit our Website: https://texcenappliancerepair.com/